Cart DB #212: The Punisher

Notes for chip search:

Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive
"Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing)
"Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games)
Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138
Some chips (like PAL16*8) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities
Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable
Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2)
Good news is that you can use wildcards, so 74139+*MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version

Name	Value
IC1	MASKROM_1M_DIP28
IC2	MASKROM_1M_DIP28
IC3	AX5202P(MMC3)
C1	?
C2	-
C3	TRACK CAP
CART1	FAMICOM_CART
D1
JP1	OPN
R1	?

Name

Value

IC1

MASKROM_1M_DIP28

IC2

MASKROM_1M_DIP28

IC3

AX5202P(MMC3)

TRACK CAP

CART1

FAMICOM_CART

JP1

OPN

As expected, such PCB like this one (glob MMC3 + two DIP28 mask-roms) havs some shuffled lines for anty-copy (this time: MMC3-PRG-A15 -> PRG-ROM-A16 MMC3-PRG-A16 -> PRG-ROM-A15 MMC3-CHR-A15 -> CHR-ROM-A16 MMC3-CHR-A16 -> CHR-ROM-A15 Other than that, MMC3 pinout matchesy the AX5202P (except the non-used pins) [url=https://obrazki.elektroda.pl/3331969300_1600759474_org.jpg][img]https://obrazki.elektroda.pl/3331969300_1600759474_thumb.jpg[/img][/url] [url=https://obrazki.elektroda.pl/6625789100_1600759478_org.jpg][img]https://obrazki.elektroda.pl/6625789100_1600759478_thumb.jpg[/img][/url] [url=https://obrazki.elektroda.pl/5380192400_1600759479.png][img]https://obrazki.elektroda.pl/5380192400_1600759479_thumb.jpg[/img][/url]

Cart name		Notes for chip search: Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive "Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing) "Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games) Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138 Some chips (like PAL168) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2) Good news is that you can use wildcards, so 74139+MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version
Mapper#
Original mapper#
PCB marks
Tags
Chips