logoUnique visits: 7270
Can you help getting more info about those carts?
Cart name
Notes for chip search:
  • Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive
  • "Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing)
  • "Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games)
  • Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138
  • Some chips (like PAL16*8) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities
  • Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable
  • Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2)
  • Good news is that you can use wildcards, so 74139+*MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version
Mapper#
Original mapper#
PCB marks
Tags
Chips
6 in 1
Typemulti
Mapper
Original mapper
PCB marksS6IN1
Tags:#squaresilk
Uploaded:2022-12-22 12:36:47

Elements:
NameValue
IC127F080
IC227F080
IC3AX5202P(MMC3)
IC474157
IC574174
IC6DIL14
C1-
C2-
CART1FAMICOM_CART
D1
JP1CLS
R1-

Chip signature:
27F080+27F080+AX5202P(MMC3)+74157+74174+DIL14

PCB top:

PCB bottom:

Shell top:


Shell bottom:

Screenshoots:
No photo
Extra info:
No info

Comments:

krzysiobal:2022-12-06 18:35:16
Thank you, fixed that. I was doing manual analyzing of all the 400 images during one night and missed that one, probably because it is in the dark spot of the picture.
Yolt1:2022-12-06 11:37:51
Dear Kryziobal, The PCB marks here should definetely note be "NONE". Instead it should be "S6IN1" as written on the top right corner of the board. I own a exactly similar cart - strangely enough it is a "4 in 1" multi cart - but it shares the same PCB. I can provide you more photos if necessary. Keep up the good work
Want to leave a comment?

Name:

Page loaded in 0.8 seconds | W3C validate