Cart DB #423: Nantetatte Baseball

Notes for chip search:

Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive
"Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing)
"Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games)
Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138
Some chips (like PAL16*8) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities
Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable
Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2)
Good news is that you can use wildcards, so 74139+*MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version

Name	Value
IC1	27F080
IC2	MASKROM_1M_DIP28
IC3	6264
IC4	SUNSOFT-4
IC5	7432
C1	10n
C2	10n
C3	22u
CART1	FAMICOM_CART
D1
D2
G1	CR2032
JP1	PINHD-2X15
R1	10k
R2	27k
R3	10k

Name

Value

IC1

IC2

IC3

IC4

IC5

10n

22u

CART1

FAMICOM_CART

CR2032

JP1

PINHD-2X15

10k

27k

10k

Deck | CART | Deck /------. M2 -> |02 01| -- GND SS4 PRG /CE | SS4 PRG A17 -> |04 03| <- SS4 WRAM /CE | CPU R/W | $F000.4 CPU D3 <> |06 05| <> CPU D2 CPU D4 <> |08 07| <> CPU D1 CPU D5 <> |10 09| <> CPU D0 CPU D6 <> |12 11| <- CPU A0 CPU D7 <> |14 13| <- CPU A1 CPU A10 -> |16 15| <- CPU A2 SS4 PRG A16 -> |18 17| <- CPU A3 CPU A11 -> |20 19| <- CPU A4 CPU A9 -> |22 21| <- CPU A5 CPU A8 -> |24 23| <- CPU A6 CPU A13 -> |26 25| <- CPU A7 SS4 PRG A14 -> |28 27| <- CPU A12 +5V -- |30 29| <- SS4 PRG A15 \------' 2x15 pin 0.1" edge connector * Pin numbers correspond to the markings on edge connctor * Even pins are on the label side of external cartridge (02=leftmost) Source: [https://nescartdb.com/profile/view/2265/nantettatte-baseball], [https://na6ko.hatenadiary.jp/entry/20130123/p1] [[Category: Pinouts]]

Cart name		Notes for chip search: Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive "Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing) "Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games) Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138 Some chips (like PAL168) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2) Good news is that you can use wildcards, so 74139+MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version
Mapper#
Original mapper#
PCB marks
Tags
Chips