Cart DB #434: 50000 IN 1

Notes for chip search:

Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive
"Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing)
"Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games)
Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138
Some chips (like PAL16*8) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities
Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable
Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2)
Good news is that you can use wildcards, so 74139+*MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version

Name	Value
IC1	RM-064-65K(27F080)
IC10	7474
IC11	7402
IC2	6264
IC3	74273
IC4	74153
IC5	74138
IC6	74157
IC7	74125
IC8	74125
IC9	7432
C1	100n
C2	100n
CART1	FAMICOM_CART
D1
JP1	OPN
JP2	OPN
JP3	OPN
JP4	OPN
JP5	OPN
JP6	OPN
JP7	OPN
JP8	OPN
RN1	?

Name

Value

IC1

IC10

IC11

IC2

IC3

IC4

IC5

IC6

IC7

IC8

IC9

100n

CART1

FAMICOM_CART

JP1

OPN

JP2

OPN

JP3

OPN

JP4

OPN

JP5

OPN

JP6

OPN

JP7

OPN

JP8

OPN

RN1

Witam Co to są za układy?? Do czego one moga mi sie przydać?? pierwszy układ drugi układ Mam jeszcze jakieś układy GS74LS157 GS74LS125A GS74LS32 GS74LS153 RM-064-65K UT62664PC-10 do czego to wszystko może mi sie przydać?? Wymontowałem je wszystkie z gry pegasus. Nie chce aby sie marnowały. Z góry dzieki za odpowiedzi gajosp2 -- IC10 = Gd74ls74a / Gs9318 IC3 = Hd74ls273p / Gs9319 Udało mi się rozszyfrować ten kardridż - $8000-$ffff Rejestry: WRITE @ $8000-$ffff: fedcba9876543210 A~[1.....bPuPPpppmx] |||||||||| |||||||||+- PRG bank size: 0=16K, 1=32K ||||||||+-- mirroring: 0=V, 1=H |+|+++++--- PRG bank | +-------- mode: 0=UNROM, 1=NROM | (CHR-RAM wr. prot. in ROM mode) +---------- bbb at $c000 in UNROM mode READ @ $6000-$7fff: 76543210 D~[VVVVVVVV] |||||||| ++++++++- value set using jumpers (open=0, closed=1) Mapa pamieci: ux | $8000 | $c000 | comment 00 |PPPppp |bbbppp | UNROM mde 01 |PPPpp0 |PPPpp1 | broken mode 10 |PPPppp |PPPppp | NROM 16K mode 11 |PPPpp0 |PPPpp1 | NROM 32K mode -- Dzięki zdjęciom dostarczonym przez autora tematu udało mi się rozszyfrować wszystkie połączenia i przeanalizować kardridż. Mapper jest identyczny jak we wcześniej wspomnianym 2500-in-1 z tą różnicą, że tutaj obecna jest dodatkowa funkcjonalność, pozwalająca na odczyt wartości ustawionych za pomocą zworek i drabinki rezystorowej. Jest ona prawdopodobnie wykorzystywana do zmiany nazwy zgłaszanej jako tytuł (pewnie można ustawić 10000-in-1, 20000-in-1, itd). Taka pierdółka, a do jej obsługi konieczne było dodanie trzech scalaków: 74138, 2x74125

Cart name		Notes for chip search: Use "+" as delimeter for all fields (except "cart name", where space is used); if many values are entered, all of them must appear in the cartridge then; case is not sensitive "Mapper" is the actual mapper used by this cartridge hardware (might not match the one at wiki.nesdev.com, as at the moment I was analyzing this cartridge, there was no mapper assigned to it, so I had to assign my own number for testing) "Original mapper" is the mapper used by licensed version of this game (for multicarts, it refers to mapper of the inside games, so 0+2 means this cartridge can run NROM+UNROM games) Order in which you put values doesn't matter (you can write 7400+74138+7400 or 7400+7400+74138 to search for a cartridge that contains at least two 7400 chips and one 74138 Some chips (like PAL168) appear in cartridges as 16V8 or 16L8, so be sure to check both posibilities Same goes for memories - type 27F080 to search for 32 pin memories, 27512 for 28 pin with two chip enables or MASKROM_1M_DIP28 for 28 pin with one chip enable Same goes for mappers - some examples: AX5904(MMC1), AX5202P(MMC3), PT8154BM (9112MMC3), AX5208C(VRC4), 23C3662(VRC2) Good news is that you can use wildcards, so 74139+MMC3* will search for any cartrige that has at least one 74139 and MMC3 chip in any version
Mapper#
Original mapper#
PCB marks
Tags
Chips